55e1ba27-e3e7-4e75-965a-7d76a02ac65eADFORS Novelio® / EKOTEX® glass fibre wallcoverings EKOTEX® is a glassfibre wallcovering of 0,16 kg/m² with surface finishing, preglued or with final coloured finishing. Products are glued on the wall and painted afterwards.
Scope and type:
The type of this EPD is "cradle-to-gate" EPD with options. This EPD declares the life cycle analysis
LCA for a specific product.The software GaBi ts is used to perform the LCA. The background
database used is Ecoinvent v3.4.
The following life cycle stages are considered:
- Production
A1- A3 ΠRaw material supply, transport and manufacturing;
- Installation
A4 ΠTransport to building site, A5 ΠInitial installation into building including packaging waste
processing and additional material for installation;
- End-of-life
C2 ΠTransport to waste processing, C4 ΠDisposal landfilling;
- Benefits and loads beyond the product system boundary.
Representativeness:
This EPD is representative for products produced and sold in the EU. This EPD declares as specific
product the EKOTEX® fiberglass wallcovering produced by SAINT-GOBAIN ADFORS CZ s.r.o in
two manufacturer™s plants Hodonice, Czech Republic 62% and Hornstein, Austria 38%.
The EPD covers the following products in the EKOTEX® portfolio:
- EKOTEX® EXCELLENT 91XX;
- EKOTEX® SPRINT 92XX;
- EKOTEX® HYGIENE 93XX;
- EKOTEX® SCHONE LUCHT 94XX;
- EKOTEX® ECOLOGISCH 95XX.
Starting point for this EPD is EKOTEX® 9130. The other products differ less than 1%.
Calculation rules:
CUT OFF RULES
The cut-off criteria applied in this study are in line with EN 15804. Packaging waste like foil, paper
arising during production A1-A3 is not considered in this study due to negligible amounts < 0.1%.
Besides the packaging waste within A1-A3 all available data from production process are considered.
Thus, material except packaging waste within A1-A3 and energy flows contributing less than 1% of
mass or energy are considered. All reported data were incorporated and modelled using best
available LCI data. Transport processes for the packaging materials are neglected due to its
insignificance. Production of capital equipment, facilities and infrastructure required for manufacture
are outside the scope of this assessment. The sum of the excluded material flows does not exceed
5% of mass, energy or environmental relevance.
DATA QUALITY and DATA COLLECTION PERIOD
Overall the data quality can be described as good. Specific data was collected from SAINT-GOBAIN
ADFORS CZ s.r.o though a questionnaire, including inquiries about product characteristics and
packaging, logistics data e.g. transport, production and installation information and end-of-life. The
data collection period for specific data was the year 2017. Generic data i.e. upstream acquisition
and production of raw materials, energy generation, transport, waste treatment processes were
selected from Ecoinvent. In the case of missing data, a relevant proxy was searched and adjusted to
the corresponding unit process.
ALLOCATIONS
The production process does not deliver any co-products. The applied software model does not
contain any allocation. The overall production comprises further products beside the product
considered in this study. Data for thermal and electrical energy as well as auxiliary material refer to
the declared product. During data collection the allocation is done via total produced area.
Scenarios and additional technical information:
A1. Raw materials supply
This module considers the extraction and processing of all raw materials and energy which occur
upstream to the Novelio® manufacturing process, as well as waste processing up to the end-of
waste state.
A2. Transport of raw materials to manufacturer
This includes the transport distance of the raw materials to the manufacturing facility Hodonice,
Czech Republic and Hornstein, Austria via road weighted truck transport: 0,18 kg input material,
average distance of 203 km.
A3. Manufacturing
This module covers the manufacturing of EKOTEX® and includes all processes linked to production
including packaging and internal transportation. Use of electricity, fuels and auxiliary materials is
taken into account as well.
A4. Transport to the construction site
The average transport distance to the construction site for EKOTEX® is 900 km truck transport:
product incl. packaging 0,19 kg, 900 km.
A5. Application and use
This module includes the environmental aspects and impacts associated with the application of the
wallpaper. EKOTEX® is a paintable fibreglass wall covering applicated with vinyl glue on walls inside
buildings. For the installation the vinyl glue 0,2 kg/m² is declared in this study. As paint the
standard is 2 layers of acrylic paint. Paint and cutting losses are not declared.
C2. Transport to End of life
This module includes transportation distance to landfill truck transport: 0,16 kg, 50 km.
C4. Disposal
As only one end-of-life scenario landfilling is considered for EKOTEX® of SAINT-GOBAIN ADFORS
CZ s.r.o.
Declaration of SVHC:
None of the substances contained in the product are listed in the fiCandidate List of Substances of
Very High Concern for authorisationfl, or they do not exceed the threshold with the European
Chemicals Agency.
More information:
http://www.ekotexwandafwerking.nl
0This EPD is representative for products produced and sold in the EU. This EPD declares as specific product the EKOTEX® fiberglass wallcovering produced by SAINT-GOBAIN ADFORS CZ s.r.o in two manufacturer’s plants (Hodonice, Czech Republic (62%) and Hornstein, Austria (38%)).Glass wallcoverings are finished fabrics produced from glass fibre yarns and glass voluminized
textured and textured yarns. Wallcoverings are delivered with surface finishing in white colour
standard, with white pigment, preglued easy glue or with final coloured finishing. Products are
typically glued on the wall and painted afterwards. Standard ones need to be painted twice,
pigmented once and finalized ones do not require any painting but can be repainted if necessary.
Glass fibres are produced by melting of input materials followed by drawing and coiling. E Eutal
type glass is used for the purpose of mesh fabric production. Next is glass-fibre weaving, where
"greige fabrics" is produced. Different weave methods are used for fabric production. Last step is the
hardening process, in which a finishing layer is applied to the greige fabric. The product complies
with /EN 15102:2007+A1:2011/ and has the declaration of performance DOP Π2 ΠGlass Fibre Wall
Covering Π03 issued on 28/2/2018.
EKOTEX® is applied on internal walls. If well maintained, there is no lifetime limitation. Product can
be repainted several times without losing its performance.
COMPONENT > 1%
[kg/m2]
Glass fibre organic
0,13
Organic coating
0,03
* > 1% of total mass
EKOTEX® glass fibre wallcoverings with the grammage of 0,16 kg/m² consist of 0,13 kg/m² glass
fibre fabric and 0,03 kg/m² organic coating as water based styrene acrylic binder with content of
starch.
EPDaverage datasetecoinvent 3.4 databaseecoinvent database (all versions)PDF EPD for 1.1.00120.2019 ADFORS Novelio® / EKOTEX® glass fibre wallcoveringsGert Jan van Beijnum, NIBE BVEN 15804ISO 14025Siegrun Kittelberger, sphera2021-01-28T21:01:27.025145ILCD format 1.1EPD Data Format Extensions v1.203.00.000Stichting MRPI®1.1.00120.2019EKOTEX®trueFree of charge for all users and usesADFORS Novelio® / EKOTEX® glass fibre wallcoverings1Use of renewable primary energy (PERE)Input0.9610.0009570.5981.560.7330.000425MJUse of renewable primary energy resources used as raw materials (PERM)Input0.00.00.330.33-0.330.0MJTotal use of renewable primary energy resources (PERT)Input0.9610.0009570.9281.890.0001810.4030.0002190.000425-0.0413MJUse of non renewable primary energy (PENRE)Input4.220.0702-1.849.535.637.11MJUse of non renewable primary energy resources used as raw materials (PENRM)Input7.080.02.112.114.97-7.08MJTotal use of non renewable primary energy resource (PENRT)Input11.30.07020.27411.60.013310.60.01610.0322-0.454MJUse of secondary material (SM)Input0.00.00.00.00.00.00.00.00.0kgUse of renewable secondary fuels (RSF)Input0.00.00.00.00.00.00.00.00.0MJUse of non renewable secondary fuels (NRSF)Input0.00.00.00.00.00.00.00.00.0MJUse of net fresh water (FW)Input0.006691.33e-050.0005420.007252.51e-060.009153.04e-063.81e-05-0.000192m3Hazardous waste disposed (HWD)Output0.00.00.00.00.00.00.00.00.0kgNon hazardous waste dispose (NHWD)Output0.00.00.00.00.00.00.00.00.0kgRadioactive waste disposed (RWD)Output0.00.00.00.00.00.00.00.00.0kgComponents for re-use (CRU)Output0.00.00.00.00.00.00.00.00.0kgMaterials for recycling (MFR)Output0.00.00.00.00.00.00.00.00.0kgMaterials for energy recovery (MER)Output0.00.00.00.00.00.00.00.00.0kgExported electrical energy (EEE)Output0.00.00.00.00.00.09150.00.00.0MJExported thermal energy (EET)Output0.00.00.00.00.00.1940.00.00.0MJGlobal warming potential (GWP)0.630.00448-0.04440.590.0008460.3750.001020.000973-7.39e-05kg CO2-eqv.Depletion potential of the stratospheric ozone layer (ODP)5.17e-088.3e-101.19e-095.37e-081.57e-103.84e-081.9e-103.87e-10-4.35e-05kg R11-eqv.Acidification potential of soil and water (AP)0.002971.77e-059.46e-050.003083.34e-060.001974.05e-067.21e-06-0.0229kg SO2-eqv.Eutrophication potential (EP)0.001975.19e-063.67e-050.002019.8e-070.001221.19e-062.1e-06-0.0227kg Phosphate-eqv.Formation potential of tropospheric ozone (POCP)0.0001881.86e-068.36e-060.0001983.51e-070.000334.25e-077.82e-07-0.0112kg Ethene-eqv.Abiotic depletion potential for non fossil resources (ADPE)4.31e-051.29e-088.87e-084.32e-052.44e-092.52e-062.95e-091.14e-09-1.83e-08kg Sb-eqv.Abiotic depletion potential for fossil resources (ADPF)9.020.0690.2519.340.0139.910.01580.0315-0.345MJ